Indirect Open Vented Storage Unit

Aleabrax AMX Series

The AMX Series is an indirect, open vented, storage water tank designed to be heated by a remote heat source. It is authorised to Australian Standard AS3498.

Indirect Open Vented Storage Water Tank

Aleabrax AMX Series

The AMX Series is an indirect storage hot or warm water heat exchange system that is heated by a remote heat source. The water in the storage tank is treated with a tannin-based inhibitor.

The storage tank is open-vented to the atmosphere, by means of an expansion tank.

The treated water is heated by a pump circulating it through the remote heat source unit the thermostat sensor on the storage tank is satisfied and therefore switches the circulating pump to the heat source off.

Located within the storage tank is a copper heat exchanger coil that contains potable, consumable water. As water is drawn through the coil, it is heated by the neutral water.

Specifcations

Model Number
AMX 180
AMX 300
AMX 420
AMX 600
Diameter (A)
1,112mm
1,362mm
1,654mm
2,016mm
Height (B)
2,030mm
2,030mm
2,030mm
2,030mm
Process Flow / Return Tab E flange (C)
65mm
80mm
100mm
100mm
Burner Flow / Return (D)
65mm BSP
80mm BSP
80mm BSP
100mm BSP
Hot Water / Cold Water Inlet (E)
50mm Cu
65mm Cu
100mm Cu
100mm Cu
Peak Flow Rate @ 60°C (L/min)
180
300
420
600
Peak Flow Rate @ 50°C (L/min)
150
250
350
500
Heat Exchanger Pressure Drop (kPa)
33
33
33
33
Weight (dry / wet)
525 / 1,939
1,012 / 3,221
1,486 / 4,836
2,124 / 7,224

Heat Source

The AMX indirect heat exchange systems are compatible with the Aleabrax condensing gas appliances, the Aleabrax DVX heavy duty indirect appliance and renewable energy sources such as solar, heat pump or geothermal. 

Forza - Floor Standing
DVX - Gas / Oil

Replacement Market

The Aleabrax AMX range is a suitable replacement for the discontinued Edwards LEX products.

Please contact the Aleabrax technical team or your local distributor for sizing and suitability.

Get in touch with us

information and support